News
Contact us
Add：NO. 12 Xinsi Road, Hengjing, Wuzhong District, Suzhou City, Jiangsu Province, China
Contact：Raul Dong
M.P：+8613616272997
Tel：0512-66374895
Fax：0512-66204350 
Mail：raut.dong@plastic-neway.com
Website：www.plastic-neway.com
Company newsCurrent location：Home>News>Company news

The plastic injection molding machine is ready for work and operating procedure before it\'s turned on

Plastic injection processing is inseparable from the injection molding machine, so must pay attention to the maintenance of the injection molding machine in the maintenance, make the machine in the best performance, not only can reduce the accident rate, but also help to extend the service life of the machine.
1. Carefully check whether there is water or oil immersed in the electrical control box.
2. Carefully check whether the supply voltage meets the requirements of the equipment.
3. Carefully check whether the emergency stop switch and front and rear safety door switch work normally.
4. Carefully check whether all moving parts have enough lubricating oil and add enough.
5. Turn on the electric heating to heat each part of the barrel for a period of time. The holding time is different according to the requirements of various raw materials.
6. Add enough raw materials in the hopper, some of which should be dried in advance.
7. Pay attention to cover the heat shield on the barrel.
8. Before stopping the machine, clean up the raw materials in the barrel, and then open the mold to make the toggle mechanism in a closed state.
Strict operating procedures can also prevent workers from accidental injury in the process of operation, which is not only the guarantee of normal operation of the injection molding plant, but also the responsibility for the personal safety of workers.
Next article：Injection mold parts structure and processing methods
Last article：Causes and solutions for warping, bending and warping of injection molded parts
【Back】
About Us
Company profile
President Address
Honors
Organizational structure
Corporate culture
Cooperative partner		 Marketing
Talent concept
Recruitment Information		 Products
Injection Molding Product Series
Mold series
Equipment series		 News
Company news
Industry news
Industry Events		 Marketing
Marketing team
Marketing concept		 Contact
Address: NO. 12 Xinsi Road, Hengjing, Wuzhong District, Suzhou City, Jiangsu Province, China
Website: www.plastic-neway.com
Tel: 0512-66374895
Copyright ©www.plastic-neway.com. All Rights Reserved. 版权所有：苏州新路塑业有限公司 备案号：苏ICP备13057078号-2  苏公网安备32050602012411号
 

Raul
+8613616272997
(Wechat/WhatsApp)